Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Robot Coupe Blixer 4 A Series
Summarization of Contents
IMPORTANT WARNING
UNPACKING
Instructions for carefully removing equipment from packaging and storing manuals.
INSTALLATION
Guidelines for operating the machine on a clean, sturdy counter with adequate air circulation.
CONNECTION
Checks for power supply correspondence and grounded outlet with GFCI protection.
HANDLING
Precautions for handling sharp blades, including wearing cut-proof gloves.
USE
Guidelines on operating the machine correctly, avoiding modifications, and safety features.
INITIAL CLEANING GUIDELINES
Steps for safely cleaning the appliance and its attachments, avoiding immersion of the motor base.
INITIAL MAINTENANCE GUIDELINES
Instructions for motor housing, seals, and checking attachments for corrosive agents.
ROBOT COUPE U.S.A., INC. ONE YEAR LIMITED COMMERCIAL WARRANTY
Exclusions from Warranty
Details specific items and conditions not covered by the limited commercial warranty.
INTRODUCTION TO YOUR NEW EMULSIFIER-MIXER
SWITCHING ON THE MACHINE
Guidance on electrical connections and description of the control panel.
ASSEMBLY
Step-by-step instructions for assembling the Blixer unit with its components.
DETAILED CLEANING PROCEDURES
MOTOR UNIT
Instructions for cleaning the motor unit with a damp cloth, avoiding water penetration.
BLADE
Procedure for cleaning the blade, recommending cut-resistant gloves.
WIPER ASSEMBLY
Instructions for removing and cleaning the wiper assembly from the bowl lid.
DETAILED MAINTENANCE PROCEDURES
BLADE SHARPNESS AND REPLACEMENT
Importance of blade sharpness and replacement for consistent cutting quality.
MOTOR SEAL INSPECTION AND REPLACEMENT
Periodic examination and replacement of the motor shaft seal to prevent liquid ingress.
BOWL LOCKING WASHER
Information on the bowl locking washer and its replacement when worn.
WIPER ASSEMBLY REPLACEMENT
Details on the wiper assembly and replacement of worn rubber wipers.
TECHNICAL SPECIFICATIONS
WEIGHT (Lbs)
Table detailing net and gross weights for different Blixer models.
DIMENSIONS (in inches)
Diagram and measurements for various Blixer models.
WORKING HEIGHT
Recommended height for positioning the Blixer unit for optimal use.
NOISE LEVEL
Information on the sound level of the Blixer unit during operation.
Blixer® 4 V - Blixer® 4 V Series A ELECTRIC DIAGRAM
PROCEDURE TO SET MINIMUM AND MAXIMUM SPEED
Detailed steps for qualified electricians to set minimum and maximum speed settings.
Need help?
Do you have a question about the Blixer 4 A Series and is the answer not in the manual?
Questions and answers