Serial numbers bx3/xxxx also covers the bx3 version (9 pages)
Summary of Contents for Robot Coupe Blixer 3 D Series
Page 1
• Blixer 3 Series D ® • Blixer 4 Series A ® • Blixer 4 V. Series A ® Robot Coupe U.S.A., Inc. 264 South Perkins, Ridgeland, MS 39157 Phone : 800/824-1646 • 601/898-8411 email: info@robotcoupeusa.com - website: www.robot-coupe.com 01/09/2020...
Page 3
•This machine must be operated on a clean sturdy • Should the machine malfunction or should any part • Robot Coupe can in no way be held responsible for counter or table. Keep the area around and under the be damaged, it must not be operated until it is repaired the user’s failure to follow the basic rules of cleaning and...
SUMMARY WARRANTY MAINTENANCE • Blade IMPORTANT WARNING • Motor seal • Bowl locking washer INTRODUCTION TO YOUR NEW EMULSIFIER-MIXER Blixer ® 2 • • Wiper assembly Blixer 3 • Blixer 4 • Blixer 4 V. ® ® ® TECHNICAL SPECIFICATIONS SWITCHING ON THE MACHINE •...
Page 5
ROBOT COUPE U.S.A., INC. ONE YEAR LIMITED COMMERCIAL WARRANTY THE FOLLOWING ARE NOT COVERED Commercial equipment use is defined as but not limited to the preparation of food substance within YOUR NEW ROBOT COUPE COMMERCIAL UNDER WARRANTY: the confines of a restaurant/facility, that is sold and PRODUCT IS WARRANTED TO THE consumed within said restaurant/facility.
•This machine must be operated on a clean sturdy • Should the machine malfunction or should any part • Robot Coupe can in no way be held responsible for counter or table. Keep the area around and under the be damaged, it must not be operated until it is repaired the user’s failure to follow the basic rules of cleaning and...
INTRODUCTION TO YOUR 3 ) P l a c e t h e b l a d e W A R N I N G assembly onto the motor NEW EMULSIFIER-MIXER shaft. Rotate the blade This appliance must be plugged into an Blixer 2 •...
Hold the scraper arm in place with one hand. OPERATION CLEANING With the other hand, press down on the scraper W A R N I N G arm handle, in order to compress the two lid THE UNIT SHOULD BE OFF EXCEPT WHEN PRO- wipers, and turn in an anticlockwise direction.
• WORKING HEIGHT I M P O R T A N T Sraper handle We recommend that you position the Blixer on a ® Check that your detergent is suitable for stable worktop so that the upper edge of the cutter cleaning plastic parts.
Try to restart. If the machine will not start, remove the bowl, reduce the amount of food being processed, and try again. R E M E M B E R Never try to override or defeat the purpose of, the locking and safety systems. Never put nonfood objects into the machine openings.