Installing the iSCSI bridge
Figure 6 Installing the bridge and store the shipping lock
•
Store the shipping lock on the iSCSI board (see Figure 6, step 3).
•
Connect the Ethernet cables.
•
Connect the SAS cables and peripherals.
•
Connect the library power cord.
•
Configure the bridge's host name and IP-address.
There are seven basic steps to installing the iSCSI bridge on the Dell PowerVault TL4000:
•
Remove the blank plate (see Figure 7) on the rear of the library (you need a #3 Phillips screwdriver).
Figure 7 Remove the blank plate on the PowerVault TL4000
Page 12
Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS User's Guide
Rev.C