Table of Contents
Advertisement
TP67B+ UEFI BIOS Manual
Fan Ctrl Start Value
T his item sets CPU FAN Start Speed Value.
Options:
50 (Default)
Fan Ctrl Sensitive
T he bigger the numeral is, the higher the FAN speed is.
Options:
30 (Default)
Super IO Configuration
Advanced
Super IO Configuration
Super IO Chip
Restore AC Power Loss
> Serial Port 0 Configuration
> CIR Controller Configuration
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
Restore AC Power Loss
T his setting specifies how your system should behave after a power fail or interrupts
occurs. Power Off: Leaving the system in power-o ff status aft er power recovers.
Power ON: Powering on the system immediately when power returns. Last State: 1.
Leaving the system in power-off i f the system shuts down at DC off status; 2.
Powering on the system immediately if the system shuts down at DC on status.
Options:
Power O ff (Default) / Power On / Last State
BIOS SETUP UTILITY
Specify what state to go to
when power is re-applied
after a power failure.
[Power Off]
Enter
+/-
F1
F3
F4
ESC
13
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit
Advertisement
Table of Contents
