Table of Contents
Advertisement
Quick Links
®
CLEARPRO TECHNOLOGY
FILTER LATERALS EXTENSION KITS
FOR FILTER MODELS: TR100, TR100C, TR100C3, TR140, TR140C, TR140C3 AND TA100
INSTALLATION AND
USER'S GUIDE
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
®
CLEARPRO TECHNOLOGY
Filter Laterals Extension Kits Installation and User's Guide
Advertisement
Table of Contents
Related Manuals for Pentair CLEARPRO TECHNOLOGY TA100
Summarization of Contents
Important Warning and Safety Instructions
General Safety Notices
General safety notices, installer and user information, and safety alert symbol explanations.
High Pressure Operation Hazards
Hazards associated with high pressure operation and procedures to avoid them.
Electrical Safety and Servicing Precautions
Safety measures for electrical shock prevention and procedures during servicing.
System Pressure and Component Safety
Safety warnings on exceeding system pressure, component integrity, and safe operation.
Start-Up and Servicing Safety Procedures
Critical safety procedures for system start-up and servicing to prevent pressure hazards.
Overview
ClearPro Technology Filter Kits
Introduction to ClearPro Technology Filter Lateral Extension Kits for specific filter models.
General Filter Information and Data
Information on pool filtration, water chemistry, and filter operation data tables.
Kit Installation
Installation Requirements
Requirement for qualified service professionals to install ClearPro Technology filter extension kits.
Triton II Sand Filter Installation Steps
Detailed steps for installing the extension kits on Triton II Sand Filters.
Tagelus Sand Filter Installation Steps
Detailed steps for installing the extension kits on Tagelus Sand Filters.
Filling the Filter with Sand
Procedure for selecting and adding the correct sand media to the filter tank.
Pre-Start Checks
Final checks and preparations to ensure the filter is ready before starting operation.
Start Up Instructions
Backwashing Before Initial Start Up
Instructions for backwashing the filter to remove debris before initial operation.
Initial System Start Up
Steps for starting the filter system for the first time, including air bleeding.
Filter Maintenance
Cleaning Frequency and Indicators
Indicators for determining when the filter needs backwashing or cleaning.
Chemical Cleaning Procedure
Procedure for performing chemical cleaning on the filter sand bed.
Need help?
Do you have a question about the CLEARPRO TECHNOLOGY TA100 and is the answer not in the manual?
Questions and answers