Table of Contents
Advertisement
TP43E XE/TP43E HP/TP45E HP BIOS Manual
Full Screen LOGO Disaply
T his item allows you to enable/disable Full Screen LOGO Show function.
Options:
Enabled (Default) / Disabled
AddOn ROM Display Mode
T his item sets the display mode for option ROM.
Options:
Force BIOS (Default) / Keep Current
Bootup Num-L ock
Selects the NumLock State after the system switched on.
Options:
ON (Default) / OFF
PS/2 Mouse Support
T his BIOS featu re det ermines i f the BIOS should reserv e IRQ12 for the PS/2 mouse
or allow other devices to make use of this IRQ.
Options:
Auto (Default) / Enabled / Disabled
Wait for 'F1' If Error
T his BIOS feature controls the system's response when an error is detected during
the boot sequence.
Options:
Enabled (Default) / Disabled
Hit 'DEL' Message Display
T his BIOS feature allows you to control the display o f the Hit " DEL" to enter Setup
message during memory initialization.
Options:
Enabled (Default) / Disabled
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When set to
Enabled, this item allows the option ROMs to trap interrupt 19.
Options:
Disabled (Default) / Enabled
BOOT SUCCESS BEEP
When this item is set to Enabled, BIOS will let user know boot success with beep.
Options:
Enabled (Default) / Disabled
23
Advertisement
Table of Contents
