Table of Contents
Advertisement
TP43E XE/TP43E HP/TP45E HP BIOS Manual
USB Dev ice Wakeup from S3/S4
T his item allows you to enable or disabled the USB resume from S3/S4 function.
Options:
Disabled (Default) / Enabled
High Performance Event Timer
T his item allows you to enable or disabled the HPET.
Options:
Disabled (Default) / Enabled
HPET Memory Address
T his item allows you to set the memory address of HPET .
Options:
FED00000h (Default) / FED01000h / FED02000h / FED03000h
Resume On PME#
When you select Enabled, a PME signal from PCI card returns the system to Full ON
state.
For this function to work, you may need a LAN add-on card which supports the
Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard to
enable i f applicable.
Options:
Disabled (Default) / Enabled
Resume On RTC Alarm
When " Enabled", you can set the date and time at which the RT C (real-time clock)
alarm awak ens the system from Suspend mode.
Options:
Disabled (Default) / Enabled
RTC Alarm Date (Days)
You can choose which date the system will boot up.
System Time
You can choose the system boot up time, input hour, minute and second to specify.
Active State Power-Management
T his item sets the ASPM configuration for the PCI Express devices b efore the
operating system boots. T his f unction is for OS which does not support ASPM.
Options:
Disabled (Default) / Enabled
14
Advertisement
Table of Contents
