Biostar TP43 HP - BIOS Manual page 7

TP45 HP/TP43 HP BIOS M anual
Device
This area shows the detected connected device.
SATA Port0/1/2/3/4/5
This item allows you to select the connected device type.
Options: Auto (Default)
S.M.A.R.T.
This item allows you to control the device S.M.A.R.T function.
Options: Enabled (Default) / Disabled
SATA 1/2/3/4/5/6 Device; Primary IDE Master/Slave
Main
SATA 1 Device
Device :
Type
LBA/Large Mode
Block (Multi-S ector Transfer)[Aut o]
PIO Mode
DMA Mode
S.M.A.R.T
32Bit Data Tra nsfer
vxx .xx (C)Copyright 1985-200x, American Me gatrends, Inc.
T he BIOS detects the information and values of resp ective devices, and these
information and values are shown below to the name of the sub-menu.
Type
Select the type of the IDE/SAT A drive.
Options: Auto (Default) / CDROM / ARMD / Not Installed
LBA/Large Mode
Enable or disable the LBA mode.
Options: Auto (Default) / Disabled
Block (Multi- Sector Transfer)
Enable or disable multi-sector trans fer.
Options: Auto (Default) / Disabled
BIOS SETU P U TILITY
[Aut o]
[Aut o]
[Aut o]
[Aut o]
[Aut o]
[Ena bled]
6
Select the type
of device connected
to the system.
S elect Screen
S elect Item
+- C hange Option
F1 G eneral Help
F10 S ave and Exit
ESC E xit