Hard Disk Write Protect; Ide Detect Time Out (Sec); Ata(Pi) 80Pin Cable Detection - Biostar T5 XE - BIOS Bios Manual

T5 XE/T5XE CFX-SLI BIOS Manual
PIO Mode
Select the PIO mode.
Options: Auto (Default) / 0 / 1 / 2 / 3 / 4
DMA Mode
Select the DMA mode.
Options: Auto (Default) / SWDMA0 ~ 2 / MWDMA0 ~ 2 / UDMA0 ~ 5
S.M.A.R.T
Set the Smart Monitoring, Analysis, and Reporting T echnology.
Options: Auto (Default) / Disabled / Enabled
32Bit Data Transfer
Enable or disable 32-bit data transfer.
Options: Enabled (Default) / Disabled
Hot Plug
T his item allows you to control the hot-plug function under RAID or AHCI mode.
Options: Disabled (Default) / Enabled

Hard Disk Write Protect

Disable or enable device write protection. T his will be effective only if the device
is accessed through BIOS.
Options: Disabled (Default) / Enabled

IDE Detect Time Out (Sec)

Select the time out value for detecting IDE/SAT A devices.
Options: 35 (Default) / 30 / 25 / 20 / 15 / 10 / 5 / 0

ATA(PI) 80Pin Cable Detection

Select the mechanism f or det ecting 80Pin AT A(PI) Cable..
Options: Host & Device (Default) / Host / Device
7