Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Santec OptoTest OPM-150
Summarization of Contents
Initial Preparation
Unpacking and Inspection
Inspect the unit and its contents upon arrival and note any damage.
Damaged In Shipment
Procedure for reporting and handling damaged instruments received from the shipper.
Standard Contents
List of items included with the Model OP760 Multichannel High-Speed Power Meter.
Definition of Specifications
Dynamic Range
Defines the power measurement range from maximal to minimal levels before saturation or noise dominates.
Linearity
Explains photodetector linearity and its impact on measurement accuracy.
Calibration Wavelength
Specifies the nominal wavelengths used for instrument calibration points.
Calibration Traceability
Details the traceability of absolute calibration data to N.I.S.T. standards.
Spectral Responsivity
Describes detector efficiency in converting optical power to electrical current, varying by wavelength.
Absolute Accuracy
Includes total measurement uncertainties in calibration, traceable to N.I.S.T.
Optical Power Meter, Channel Performance
How multichannel instruments convert and digitize optical power levels.
Instrument, Warm up Time
Guidelines for acclimating the instrument to environmental changes for stable measurements.
Recommended Recalibration Period
Time period recommended for re-calibration to maintain accurate specifications.
Optical Power Meter, Fiber Compatibility
Factors affecting measurement based on detector area, fiber NA, and optical interface.
Instrument, Environmental
Specifies operating and storage temperature ranges, and humidity limits.
How to Navigate the User Interface
Mode Select Screen
Explains the function of the Mode Select screen as a home screen for navigation.
Operation Mode Screens
Describes how buttons function within different operation screens and navigation flow.
Front Panel Operation
OPM Mode
Controls the optical power meter functions and supports various measurement modes.
Settings
Fast Sampling (OPM)
Configuration option to enable or disable fast sampling for increased measurement rate.
Global Settings (Startup Mode and Temperature)
Configuration for startup mode and selection of temperature units (C/F).
Status Mode
Firmware Versions
Displays firmware versions for main, UI, and display components.
Miscellaneous Settings
Shows settings like EEPROM Write Protect status and current temperature.
Need help?
Do you have a question about the OptoTest OPM-150 and is the answer not in the manual?
Questions and answers