Related Manuals for Omron sysmac EtherCAT NX1P2 Series
Summarization of Contents
5. Applicable Devices and Device Configuration
5.1. Applicable Devices
Lists OMRON CPU Units and Kashiyama Dry Vacuum Pump models.
5.2. Device Configuration
Details hardware components and their specifications for EtherCAT connection.
6. EtherCAT Settings
6.1. Parameter
Specifies required EtherCAT parameters, such as the node address setting.
6.2. Device Variable
Lists device variables for data communication between the controller and the vacuum pump.
7. EtherCAT Connection Procedure
7.1. Work Flow
Outlines the sequential steps for connecting the controller and the vacuum pump via EtherCAT.
7.2. Kashiyama Dry Vacuum Pump Setup
Details the physical setup procedures for the Kashiyama Dry Vacuum Pump.
7.3. Controller Setup
Guides on configuring the OMRON controller, including software installation and network settings.
7.4. EtherCAT Communication Status Check
Verifies the successful establishment of EtherCAT communication and data transfer.
8. Initialization Method
8.1. Initializing a Controller
Provides procedures to reset the controller to its factory default settings.
Need help?
Do you have a question about the sysmac EtherCAT NX1P2 Series and is the answer not in the manual?
Questions and answers