Related Manuals for TLV JF3X
Summarization of Contents
Safety Considerations
Safety Symbols and Warnings
Explains safety symbols like DANGER, WARNING, and CAUTION.
Operation
Principles of Air and Condensate Discharge
Details the discharge process for initial air, cold condensate, hot air, and closed position.
Maintenance
Operational Check
Guidance on daily visual inspection and periodic diagnostic checks of the trap.
Parts Inspection
Procedure for inspecting individual parts during maintenance or disassembly.
Disassembly/Reassembly
Disassembly/Reassembly of Lock Release Valve
Steps for disassembling and reassembling the optional lock release valve.
Removing/Reattaching Drain Plug
Procedure for removing and reattaching drain plugs for various models.
Removing/Reattaching Cover
Steps for removing and reattaching the product cover.
Components Inside the Cover
Procedures for removing and reassembling components located within the cover.
Components Inside the Body
Procedures for removing and reassembling components located within the body.
TLV Express Limited Warranty
Warranty Exceptions
Lists conditions and causes that are not covered by the product warranty.
Warranty Duration
Specifies the warranty period and claim submission timeframe.
Exclusive Remedy
Defines the sole remedy available under the warranty, typically replacement.
Exclusion of Consequential and Incidental Damages
Excludes liability for indirect, consequential, or incidental damages.
Exclusion of Other Warranties
Disclaims all other express or implied warranties beyond the stated one.
Severability
Addresses the enforceability of warranty provisions if parts are found invalid.
Pressure-balancing Line Connection Option
Configuration for Pressure-balancing Line
Details the setup and piping example for the pressure-balancing line option.
Need help?
Do you have a question about the JF3X and is the answer not in the manual?
Questions and answers