Related Manuals for masosine SPS 250
Summarization of Contents
Warranty
Exceptions
Details specific exclusions for warranty and liability claims.
When You Unpack Your Pump
Inspection
Procedure for checking components for damage or missing parts.
Safety Notes
Dangers When Handling the Machine
General dangers and intended use of the machine.
Safety Measures in Normal Operation
Operate with functioning safety devices; inspect machine.
Protective Devices
Ensure protective devices are correctly attached and functioning.
Dangers Due to Electrical Energy
Electrical work by qualified electrician; check connections.
Special Danger Points
Rotating rotor can crush fingers; secure drive when stationary.
Limit Values for the Pump
Maximum pressure, speed, and temperature must not be exceeded.
Maintenance and Repair
General guidelines for maintenance and repair procedures.
Safety Notes (ATEX)
Earthing the Pump
Pump must be earthed by cable; drive motor must also be earthed.
Pump Specifications
Dimensions (in Millimetres)
Detailed dimensional drawings and specifications for pumps.
Good Pump Installation Practice
Dos and Don'ts
Key installation practices and common errors to avoid.
Connection to the Piping
Cavitation
Explanation of cavitation, its causes, and how to avoid it.
Possible Pump Orientations
Changing the Pump Orientation
Step-by-step guide for altering the pump's installation orientation.
Changing Rotation Direction
Procedure for reversing the direction of rotor rotation.
Flushing the Seal System
Static Flushing Device
Description and fitting of the static flushing device.
Cleaning and Sterilisation
The CIP Procedure
Detailed steps and requirements for performing CIP cleaning.
Steam-in-place (SIP) for MasoSine Products
Procedure for steam sterilization of the pump.
Heating and Cooling Option
Part Numbers for Heating and Cooling Options
List of part codes for heating/cooling options by pump model.
Changing the Oil
SPS 100
Procedure for checking and filling grease for SPS 100.
SPS 200, SPS 250, SPS 300, SPS 400, SPS 500
Procedure for checking and filling oil for larger pump models.
Troubleshooting
Pump Does Not Draw In
Common causes and remedies for pump failure to draw fluid.
Pump Does Not Deliver
Common causes and remedies for pump failure to deliver fluid.
Pump is Noisy
Causes and remedies for pump noise.
Pump Leaks
Causes and remedies for pump leaks.
Pump Leaks at Front Housing
Causes and remedies for leaks at the front housing.
Pump is Blocked
Causes and remedies for a blocked pump.
Smells and Smoke Coming from the Pump
Causes and remedies for smells and smoke.
Adjusting the Shaft
Adjusting Dimension X in Models with Cast Power Frame
Procedure for adjusting dimension X on cast iron frame models.
Adjusting Dimension X in Models with Stainless Steel Power Frame
Procedure for adjusting dimension X on stainless steel frame models.
Disassembly and Assembly
Dismantling and Assembling the SPS 100
Detailed guide for disassembling and assembling the SPS 100 pump.
Dismantling and Assembling the SPS 200
Detailed guide for disassembling and assembling the SPS 200 pump.
Dismantling and Assembling the SPS 250, SPS 300, SPS 400 and SPS 500
Guide for disassembling and assembling SPS 250, 300, 400, 500 pumps.
The Static Flushing Device
SPS 100
Fitting instructions for the static flushing device on SPS 100.
SPS 200, SPS 300, SPS 400 and SPS 500
Fitting instructions for static flushing device on SPS 200-500.
Parts Lists
Pump Parts Lists
Exploded views and parts lists for various pump models.
Seals
Overview and parts lists for mechanical seal systems.
Front Support Versions
Diagrams and lists for front support assemblies.
Sealing/Distance Ring Version
Parts lists for sealing/distance ring versions.
The Static Flushing Device
Parts lists for static flushing devices.
Available Wearing Kits
Reference list of available wearing kits.
Need help?
Do you have a question about the SPS 250 and is the answer not in the manual?
Questions and answers