Related Manuals for Memmert UFE 400
Summarization of Contents
General Safety and Intended Use
Intended Purpose for Medical Products
Details the specific applications for medical products as per directives.
Transport Safety Guidelines
Provides guidelines for safe handling and transportation of the oven.
Installation Facilities and Accessories
Subframe Accessory Details
Details on mounting the oven on a subframe for stability.
Wall Bracket Accessory Details
Instructions for wall-mounting the oven securely.
Stackable Version Accessory Details
Guidance on safely stacking multiple ovens.
Standard Equipment and Materials
Standard Equipment Features List
List of standard features included with EXCELLENT ovens.
Material Quality and Properties
Information on the materials used for construction and their resistance.
Electrical and Connection Information
Electrical Equipment Specifications
Details on voltage, current, protection class, and interference suppression.
External Connection Requirements
Specifications for connecting external equipment safely.
Oven Construction and Operation
Operating the Oven Door Mechanism
Instructions on how to open and close the oven door.
Oven Controls and Settings Management
Controls and Indicators Identification
Description of the display elements and control buttons.
Basic Oven Switching and Temperature Setting
Procedure for powering the oven on and setting the operating temperature.
Setting Air Flow Control
Adjusting the air intake and discharge rate using the air slider.
Operating Modes and Parameter Configuration
Selecting Different Operating Modes
How to choose between Normal, Weekly Programmer, and Ramp Timer modes.
Setting Operational Parameters
Steps for configuring various operational parameters like setpoints.
Interior Lighting Control (Optional)
Operation of the optional interior lighting feature.
Ramp Timer Parameter Configuration
Setting Ramp Heating and Hold Times
Define durations for heating and maintaining setpoint temperatures.
Setting Ramp Setpoint and Cooling Times
Configure target temperatures and cooling durations for ramp sequences.
Setpoint-Dependent Waiting Time Setup
Enable waiting for setpoint before starting hold time.
Ramp Timer Advanced Settings
Ramp Timer Repeats and Fan Speed
Adjust programme repeats and fan speed for ramp operation.
Ramp Timer Monitor Temperature and Start
Set monitor temperature and initiate the ramp programme.
Basic Oven Settings Configuration (SETUP)
Real-time Clock and Date Settings
Setting the internal clock and date for accurate logging and operation.
Temperature Monitoring and Protection Devices
Mechanical Temperature Limiter (TB)
Details on the primary mechanical temperature limiter.
Electronic Temperature Monitor
Information on the secondary electronic overtemperature monitoring system.
Advanced Temperature Protection Systems
Adjustable Temperature Monitor (TWW)
Details on the Class 3.1 adjustable temperature monitor.
Adjustable Temperature Limiter (TWB)
Information on the optional Class 2 adjustable temperature limiter.
Oven Calibration Procedure
General Calibration Instructions
Step-by-step guide for performing calibration.
Temperature Deviation Correction Example
Practical example of correcting temperature deviations during calibration.
Report Memory and Data Access
Reading Report Memory via RS232C
Procedure for transferring recorded data to a PC.
Steriliser Functionality and Guidelines
Purpose Definition for Sterilisers
Specifies the intended use of hot air sterilisers.
Guidelines for Sterilisation Procedures
Recommendations for sterilisation settings and product preparation.
Cleaning and Maintenance Procedures
Oven Cleaning Procedures
Recommended methods for cleaning the oven interior and exterior.
Routine Maintenance Tasks
Essential maintenance actions for longevity and warranty claims.
Error Messages and Supply Failure Handling
Error Message Codes and Troubleshooting
List and explanation of potential error codes.
Supply Failure Scenarios and Behaviour
Describes operation during and after power interruptions in different modes.
Product Approvals and Customer Support
Product Test Marks and Approvals
Displays safety and compliance test marks for ovens and sterilisers.
Address and Customer Service Details
Contact information for Memmert GmbH + Co. KG for sales and service.
Need help?
Do you have a question about the UFE 400 and is the answer not in the manual?
Questions and answers