Chapter 11. Command-Line Mode And Scripting; Working In The Command-Line Mode; Supported Commands - ACRONIS TRUE IMAGE ENTERPRISE SERVER 8.0 User Manual

Chapter 11. Command-line mode and
Acronis True Image Enterprise Server supports the command-line mode, as well as
the GUI mode, and can be used to execute special scripts.
11.1

Working in the command-line mode

An administrator might need a console interface in some situations. Acronis True
Image Enterprise Server supports this mode with TrueImageCmd.exe utility. The
file is located in a folder where Acronis True Image has been installed, by default it
is C:\Program Files\Acronis\TrueImage.
11.1.1

Supported commands

TrueImageCmd has the following format:
TrueImageCmd /[command] /[option
The following commands are supported (each command may be accompanied by
additional options):
1. create
Creates an image file with the specified file name. A complete image is created by
default. Use the /incremental option to create an incremental image.
Options
/progress:[on | off]
Shows/hides the progress information (percent completed). It is shown by default.
/filename:[filename]
Sets the image filename.
/password:[password]
Protects an image with a password.
/net_user:[username]
Specifies a user name when creating an image on a network drive.
/net_password:[password]
Specifies a user password when creating an image on a network drive.
/harddisk:[disk number]
Copyright © Acronis, Inc., 2000-2005
scripting
Command-line mode and scripting
] [option ]...
1 2
79