ACRONIS TRUE IMAGE ENTERPRISE SERVER 8.0 User Manual page 82

Command-line mode and scripting
Sets the new partition type. By default (if this option is not defined) an active
partition is created on the first hard disk and logic partitions on other disks.
/target_partition:[partition number]
Specifies the target partition number for restoring a partition over the existing one.
If the option is not specified, the program assumes that the target partition number
is the same as the partition number specified with the /partition option.
/reboot
Reboots the server after the operation is completed.
/log:[file name]
Creates a log file of the current operation with the specified file name.
3. list
Lists the available drives and partitions.
Options
/filename:[filename]
Lists the image file contents.
/password:[password]
Specifies the password for the image file (if required).
4. clone
Clones a hard disk.
Options
/harddisk:[disk number]
Specifies a source hard disk which will be cloned to the new hard disk.
/target_harddisk:[disk number]
Specifies the target hard disk number where the source hard disk will be cloned.
5. explore
Connects an image file as a virtual drive.
Options
/filename:[image file name]
82 Copyright © Acronis, Inc., 2000-2005