Time-Based Alerts; Number Of Tasks - ACRONIS Backup & Recovery 10 Server for Windows User Manual

The option defines whether to display the pop-up messages about task run results: successful
completion, failure or success with warnings. When displaying of pop-up messages is disabled, you
can review the task execution states and results in the Tasks view.
The preset is: Enabled for all results.
To make a setting for each result (successful completion, failure or success with warnings)
individually, select or clear the respective check box.
3.1.3.

Time-based alerts

Last backup
This option is effective when the console is connected to a managed machine (p. 217) or to the
management server (p. 218).
The option defines whether to alert if no backup was performed on a given machine for a period of
time. You can configure the time period that is considered critical for your business.
The preset is: alert if the last successful backup on a machine was completed more than 5 days ago.
The alert is displayed in the Alerts section of the Dashboard. When the console is connected to the
management server, this setting will also control the color scheme of the Last backup column's value
for each machine.
Last connection
This option is effective when the console is connected to the management server or to a registered
machine (p. 219).
The option defines whether to alert if no connection was established between a registered machine
and the management server for a period of time so indicating that the machine might not be centrally
managed (for instance in the case of network connection failure to that machine). You can configure
the length of time that is considered critical.
The preset is: alert if the machine's last connection to the management server was more than 5 days
ago.
The alert is displayed in the Alerts section of the Dashboard. When the console is connected to the
management server, this setting will also control the color scheme of the Last connect column's value
for each machine.
3.1.4.

Number of tasks

This option is effective only when the console is connected to the management server.
The option defines how many tasks will be displayed at a time in the Tasks view. You can also use
filters available in the Tasks view to limit the number of displayed tasks.
The preset is: 400. The adjustment range is: 20 to 500.
To make a selection, choose the desired value from the Number of tasks drop-down menu.
Copyright © Acronis, Inc., 2000-2009 45