Task Statuses - ACRONIS Backup & Recovery 10 Server for Windows User Manual

Task state diagram

Task statuses

A task can have one of the following statuses: Error; Warning; OK.
A task status is derived from the result of the last run of the task.
Status
1 Error
2 Warning
3 OK
106
How it is determined
Last result is "Failed"
Last result is
"Succeeded with
warning"
Last result is
"Succeeded", "-", or
"Stopped"
How to handle
Identify the failed task -> Check the task log to find out the
reason of the failure, then do one or more of the following:
•
Remove the reason of the failure -> [optionally] Start
the failed task manually
•
Edit the failed task to prevent its future failure
•
Edit the local plan to prevent its future failure in case a
local plan has failed
•
Edit the backup policy on the management server in
case a centralized plan has failed
View the log to read the warnings -> [optionally] Perform
actions to prevent the future warnings or failure.
No action is required.
The "-" state means that the task has never been started or
has been started, but has not finished yet and so its result
is not available.
Copyright © Acronis, Inc., 2000-2009