Adding The Acronis Plug-In To Winpe 2.X - ACRONIS Backup & Recovery 10 Server for Windows User Manual

To add Acronis Plug-in to WinPE 1.x:
1. Unpack all files of your WinPE 1.x ISO to a separate folder on the hard disk.
2. Start the Bootable Media Builder either from the management console, by selecting Tools >
Create Bootable Media or, as a separate component.
3. Select Bootable media type: Windows PE.
Select Use WinPE files located in the folder I specify
o
4. Specify path to the folder where the WinPE files are located.
5. Specify the full path to the resulting ISO file including the file name.
6. Check your settings in the summary screen and click Proceed.
7. Burn the .ISO to CD or DVD using a third-party tool or copy to a flash drive.
Once a machine boots into the WinPE, Acronis Backup & Recovery 10 starts automatically.
6.10.1.3.

Adding the Acronis Plug-in to WinPE 2.x

Bootable Media Builder provides three methods of integrating Acronis Backup & Recovery 10 with
WinPE 2.x:
•
Adding the Acronis Plug-in to the existing PE 2 ISO. This comes in handy when you have to add
the plug-in to the previously configured PE 2 ISO that is already in use.
•
Creating the PE 2 ISO with the plug-in from scratch.
•
Adding the Acronis Plug-in to a WIM file for any future purpose (manual ISO building, adding
other tools to the image and so on).
To be able to perform any of the above operations, install Bootable Media Builder on a machine
where Windows Automated Installation Kit (WAIK) is installed. If you do not have such machine,
prepare as described in How to create bootable media (p. 176).
Bootable Media Builder supports only x86 WinPE 2.x. This WnPE distribution can also work on x64 hardware.
A PE image based on Win PE 2.0 requires at least 256MB RAM to work. The recommended memory size for PE
2.0 is 512MB.
Adding Acronis Plug-in to WinPE 2.x ISO
To add Acronis Plug-in to WinPE 2.x ISO:
1. When adding the plug-in to the existing Win PE 2 ISO, unpack all files of your Win PE 2 ISO to a
separate folder on the hard disk.
2. Start the Bootable Media Builder either from the management console, by selecting Tools >
Create Bootable Media or, as a separate component.
3. Select Bootable media type: Windows PE.
When creating a new PE 2 ISO:
Select Create Windows PE 2.x automatically
o
The software runs the appropriate script and proceeds to the next window.
o
When adding the plug-in to the existing PE 2 ISO:
Select Use WinPE files located in the folder I specify
o
Specify path to the folder where the WinPE files are located.
o
182 Copyright © Acronis, Inc., 2000-2009