ViewSonic ViewPad 10pro User Manual page 12

Adding a New APN
If data connection is unable to establish, manual configuration needs to be
performed.
Note: This device includes over 700+ worldwide APN settings. If your carrier APN is not in
the list, please obtain the following information from your network service provider.
- Access Point Names (APN)
- User Name
- Password
1. Tap on icon to open setup menu.
2. Tap on button to add a new APN.
3. In Connection Menu, key in Dial Number (*99#) and Config Name; key in APN,
User name and Password obtained from your network service provider.
4. Tap button to save the APN setting.
5. Go back to the main menu and tap on
Fig. 2-6 Carrier APN is not found
Fig. 2-7 Adding New APN
Fig. 2-8 Connection Menu
button to make data connection.
7