Embedded Security for ProtectTools
6. Click Browse and choose the location for the emergency
recovery archive, and then click Next.
7. Click Next on the "Summary" page.
Setting up the basic user account
Setting up a basic user account in Embedded Security
Produces a Basic User Key that protects encrypted data,
and sets a Basic User Key password to protect the Basic
User Key.
Sets up a personal secure drive (PSD) for storing encrypted
files and folders.
Ä
CAUTION: Safeguard the Basic User Key password. Encrypted data
cannot be accessed or recovered without this password.
To set up a basic user account and enable the user security
features:
1. If the Embedded Security User Initialization Wizard is not
open, select Start > All Programs > HP ProtectTools
Security Manager.
2. In the left pane, select Embedded Security, and then select
User Settings.
4–4
If you do not want to set up a basic user account at this
time, clear the Start the Embedded Security User
Initialization Wizard check box, and then click Finish.
You can start the wizard manually to set up a basic user
account at any time by following the instructions in the
next section.
If you want to set up a basic user account, select the Start
the Embedded Security User Initialization Wizard
check box, and then click Finish. The Embedded Security
User Initialization Wizard opens. Refer to the instructions
in the next section for more details.
Reference Guide