HP Tc4400 - Compaq Tablet PC Reference Manual page 44

3. In the right pane, under Embedded Security Features, click
Configure.
The Embedded Security User Initialization Wizard opens.
4. Click Next.
5. Set and confirm the Basic User Key password, and then
click Next.
6. Click Next to confirm settings.
7. Select the security features you want, and then click Next.
8. Click Next again.
9. If more than one encryption certificate exists, select the
appropriate certificate, and then click Next.
10. Select the drive letter and label for your PSD, and then
click Next.
11. Select the size and location of the PSD, and then click Next.
12. Click Next on the "Summary" page.
13. Click Finish.
Reference Guide
To use secure e-mail, you must first configure the e-mail
client to use a digital certificate that is created with
Embedded Security. If a digital certificate is not available,
you must obtain one from a certification authority. For
instructions on configuring your e-mail and obtaining a
digital certificate, refer to the e-mail client online Help.
Embedded Security for ProtectTools
4–5