Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-2TD2637-25/QY
Summarization of Contents
Chapter 1 Overview
1.1 Brief Description
Provides a concise overview of the thermal and optical bi-spectrum network camera's capabilities.
1.2 Function
Introduces the main functions and features of the device, including fire detection and temperature measurement.
Chapter 2 Device Activation and Accessing
2.1 Activate the Device via SADP
Details the process of activating the camera using the SADP software for initial setup.
2.2 Activate the Device via Browser
Guides users on activating the camera directly through a web browser interface.
2.3 Login
Explains how to log in to the device using a web browser for access and control.
2.3.1 Plug-in Installation
Provides instructions for installing necessary plug-ins for optimal browser display and operation.
2.3.2 Illegal Login Lock
Describes the feature to enhance security by locking the device after multiple failed login attempts.
Chapter 3 Temperature Measurement
3.1 Notice
Provides essential notices and recommendations for accurate temperature measurement configuration.
3.2 Thermography Configuration Flow Chart
Outlines the step-by-step process for configuring temperature measurement using thermography.
3.3 Automatic Thermography
Details how to configure automatic temperature measurement and alarm settings for the device.
3.3.1 Set Thermography Parameters
Explains the specific parameters required to set up temperature measurement functions, including display options.
3.3.2 Set Normal Mode
Guides users on configuring temperature measurement in normal mode, including thresholds and outputs.
3.3.3 Set Expert Mode
Details how to configure advanced temperature measurement using expert mode and various rule types.
3.3.4 Set Thermography Rule
Explains how to define and customize temperature measurement rules like Point, Line, and Area.
3.4 Manual Thermography
Explains how to manually measure temperature at specific points on the live view.
Chapter 4 Fire Source Detection
4.1 Recommended Scene
Suggests optimal scenes and locations for effective fire source detection setup.
4.2 Set Fire Detection Parameters
Details the steps and parameters for configuring the dynamic fire source detection feature.
Chapter 5 Behavior Analysis
5.1 Flow Chart of Behavior Analysis
Presents a visual flowchart illustrating the process of configuring the behavior analysis function.
5.2 Set VCA Parameters
Guides on configuring various VCA (Video Content Analysis) parameters for behavior detection.
5.3 Calibration
Explains the process of calibrating the device for accurate VCA analysis.
5.3.1 Calibrate Automatically
Details the steps for automatically calibrating the device, often involving person movement.
5.3.2 Calibrate Manually
Provides instructions for manually calibrating the device using reference lines and measurements.
5.3.3 Verify the Calibration Result
Explains how to verify the accuracy of the calibration settings and results.
5.4 Set Rules
Guides on defining and configuring various VCA rules for behavior analysis.
5.5 Advanced Configuration
Covers advanced settings for VCA, including single alarm and scene modes.
Chapter 6 Event and Alarm
6.1 Set Motion Detection
Details how to configure motion detection for triggering alarms and linkage actions.
6.1.1 Normal Mode
Explains motion detection configuration using the default normal mode settings.
6.1.2 Expert Mode
Guides on configuring motion detection with advanced options, including day/night switch.
6.2 Set Video Tampering Alarm
Describes how to configure the alarm that triggers when the video feed is tampered with.
6.3 Set Alarm Input
Explains how to configure external alarm inputs to trigger device actions.
6.4 Set Exception Alarm
Details how to configure alarms for system exceptions like network disconnection or HDD errors.
6.5 Detect Audio Exception
Guides on detecting abnormal audio events like sudden sound intensity changes.
Chapter 7 Arming Schedule and Alarm Linkage
7.1 Set Arming Schedule
Explains how to set specific time periods for device tasks and alarm triggering.
7.2 Linkage Method Settings
Details how to configure device responses to triggered events or alarms.
7.2.1 Trigger Alarm Output
Describes how to configure the device to send alarm signals to external output devices.
7.2.2 FTP/NAS/Memory Card Uploading
Guides on configuring storage options like FTP, NAS, and memory cards for alarm data.
7.2.3 Send Email
Explains how to configure email notifications for alarm events, including attachments.
7.2.4 Notify Surveillance Center
Describes how to upload alarm information to a surveillance center.
7.2.5 Trigger Recording
Explains how to configure the device to automatically record video upon detecting an alarm event.
7.2.6 Set Audible Alarm Output
Details how to configure audible alarms to warn about detected events or targets.
7.2.7 Set Flashing Alarm Light Output
Guides on configuring visual alarms using flashing lights when events are detected.
Chapter 8 Live View
8.1 Live View Parameters
Introduces parameters for adjusting and customizing the live view display.
8.1.1 Window Division
Explains how to divide the live view screen into multiple window layouts.
8.1.2 Live View Stream Type
Guides on selecting different stream types for optimal live view performance.
8.1.3 Enable and Disable Live View
Describes how to quickly enable or disable the live view display for all channels.
8.1.4 Start Digital Zoom
Explains how to use digital zoom to view specific regions of the live image in detail.
8.1.5 View Previous/Next Page
Allows switching between multiple channels when the number exceeds the current window division.
8.1.6 Full Screen
Enables viewing the live image in full-screen mode for better immersion.
8.1.7 Light
Describes how to turn the illuminator on or off via the web browser.
8.1.8 Wiper
Explains how to operate the camera's wiper function through the web browser.
8.1.9 Lens Initialization
Details the process of resetting the camera's motorized lens for optimal focus.
8.1.10 Auxiliary Focus
Explains how to activate the automatic focus feature for the camera lens.
8.1.11 Quick Set Live View
Offers a quick setup for PTZ, display, OSD, and VCA settings on the live view page.
8.1.12 Lens Parameters Adjustment
Guides on adjusting lens focus, zoom, and iris for optimal image quality.
8.2 Set Transmission Parameters
Explains how to adjust network transmission parameters for stable live view display.
Chapter 9 Video and Audio
9.1 Video Settings
Details various video settings including stream type, resolution, and encoding.
9.1.1 Stream Type
Explains the different stream types (Main, Sub) for video output.
9.1.2 Video Type
Guides on selecting whether to include audio along with the video stream.
9.1.3 Resolution
Details how to select the appropriate video resolution based on needs.
9.1.4 Bitrate Type and Max. Bitrate
Explains constant vs. variable bitrate and setting maximum bitrate for video streams.
9.1.5 Video Quality
Guides on configuring video quality settings when using variable bitrate.
9.1.6 Frame Rate
Explains how to set the frame rate (fps) for video streams.
9.1.8 Smoothing
Describes the smoothing setting to adjust stream fluency versus quality.
9.1.9 Display VCA Info
Explains how to display VCA information on player or video.
9.1.7 Video Encoding
Covers different video compression standards like H.264, H.265, and MJPEG.
9.1.10 Audio Settings
Details audio encoding, input selection, and noise filtering settings.
9.1.11 Two-way Audio
Explains how to enable and use the two-way audio communication feature.
9.1.12 Set ROI
Guides on setting Region of Interest (ROI) for optimized video encoding.
9.2 Display Settings
Covers parameter settings to adjust various image features for optimal display.
9.2.1 Image Adjustment
Explains how to adjust brightness, saturation, hue, contrast, and sharpness.
9.2.2 Image Adjustment (Thermal Channel)
Guides on optimizing thermal channel image display via manual correction and AGC modes.
9.2.3 Exposure Settings
Details how to adjust exposure parameters like iris, shutter, and sensibility.
9.2.4 Day/Night Switch
Explains the day/night switch function and its configurable modes.
9.2.5 Set Supplement Light
Guides on enabling and configuring the supplement light feature for night vision.
9.2.6 BLC
Explains Backlight Compensation (BLC) to improve visibility in backlit scenes.
9.2.7 WDR
Covers Wide Dynamic Range (WDR) for clear images in scenes with high illumination differences.
9.2.8 White Balance
Describes white balance adjustment for accurate color temperature.
9.2.9 DNR
Details Digital Noise Reduction (DNR) for reducing image noise and improving quality.
9.2.10 Defog
Explains the defog function to enhance clarity in foggy or misty conditions.
9.2.11 Gray Scale
Covers the gray scale function for optical channel images.
9.2.12 Set Palette
Guides on selecting palette modes to display thermal grayscale images in color.
9.2.13 Set Target Color
Explains how to set colors for different temperature ranges to identify targets.
9.2.14 DDE
Details Digital Detail Enhancement (DDE) for adjusting image details.
9.2.15 Brightness Sudden Change
Describes handling sudden brightness changes in the scene.
9.2.16 Enhance Regional Image
Explains how to enhance specific regions of an image for better clarity and coding quality.
9.2.17 Mirror
Describes the mirror function to flip the image display horizontally or vertically.
9.2.18 Video Standard
Explains video standards like NTSC and PAL.
9.2.19 Digital Zoom
Allows digital zooming in on the image, noting potential blurriness.
9.2.20 Scene Mode
Covers predefined scene modes for optimizing display settings.
9.2.21 Local Output
Details setting local output options like CVBS, SDI, or HDMI.
9.3 OSD
Guides on customizing On-Screen Display (OSD) information like device name and time.
9.4 VCA Rule Display Settings
Explains how to customize the display of VCA rule information.
9.5 Set Privacy Mask
Details how to block specific areas in the live view to protect privacy.
9.6 Overlay Picture
Guides on overlaying a custom picture onto the live view.
9.7 Set Manual DPC (Defective Pixel Correction)
Explains how to manually correct defective pixels in the image.
9.8 Set Picture in Picture
Describes how to display images from two channels simultaneously using PiP mode.
Chapter 10 Video Recording and Picture Capture
10.1 Storage Settings
Introduces common storage paths for recording and capturing files.
10.1.1 Set Memory Card
Guides on setting up and formatting a memory card for file storage.
10.1.2 Set NAS
Explains how to configure a Network Attached Storage (NAS) for storing device files.
10.1.3 Set FTP
Details how to configure an FTP server for saving captured images and videos.
10.1.4 Set Cloud Storage
Guides on enabling and configuring cloud storage for captured data.
10.2 Video Recording
Introduces manual and scheduled recording operations.
10.2.1 Record Automatically
Explains how to configure automatic video recording based on time periods or events.
10.2.2 Record Manually
Guides on manually starting and stopping video recording.
10.2.3 Playback and Download Video
Explains how to search, playback, and download recorded video files.
10.3 Capture Configuration
Introduces manual and automatic picture capturing methods.
10.3.1 Capture Automatically
Guides on configuring automatic picture capture based on time or events.
10.3.2 Capture Manually
Explains how to manually capture pictures from the live view.
10.3.3 View and Download Picture
Explains how to search, view, and download captured pictures.
Chapter 11 Network Settings
11.1 TCP/IP
Details TCP/IP configuration for IPv4 and IPv6 network connectivity.
11.1.1 Multicast Discovery
Explains how to enable multicast discovery for automatic camera detection.
11.2 Port
Guides on configuring various ports like HTTP, HTTPS, RTSP, and Server ports.
11.3 Port Mapping
Explains how to set up port mapping for device access.
11.3.1 Set Auto Port Mapping
Guides on configuring automatic port mapping using UPnP™.
11.3.2 Set Manual Port Mapping
Details how to manually configure port mapping for device access.
11.4 Multicast
Explains multicast settings for efficient data transmission to multiple receivers.
11.5 SNMP
Guides on setting up SNMP for network management and alarm monitoring.
11.6 Access to Device via Domain Name
Explains how to use Dynamic DNS (DDNS) for accessing the device via a domain name.
11.7 Access to Device via PPPoE Dial Up Connection
Guides on configuring PPPoE for dial-up internet access and obtaining a public IP.
11.8 Enable Hik-Connect Service on Camera
Explains how to enable and use the Hik-Connect service for remote access and monitoring.
11.8.1 Enable Hik-Connect Service via Web Browser
Details enabling Hik-Connect service through the web browser interface.
11.8.2 Enable Hik-Connect Service via SADP Software
Guides on enabling Hik-Connect service using the SADP software.
11.8.3 Access Camera via Hik-Connect
Explains how to access the camera using the Hik-Connect mobile application.
11.9 Set ISUP
Guides on registering and managing the device on the ISUP platform.
11.10 Set Open Network Video Interface
Explains how to configure the Open Network Video Interface for enhanced security.
11.11 Set Alarm Host
Guides on sending alarm signals to a remote alarm host.
11.12 Set Alarm Server
Details sending alarms to a destination IP or host name via HTTP, HTTPS, or ISUP.
11.13 Set Network Service
Explains how to control the ON/OFF status of network services like WebSocket.
11.14 Set SRTP
Guides on setting up SRTP for secure real-time transport protocol.
Chapter 12 System and Security
12.1 View Device Information
Explains how to view detailed device information like model and firmware version.
12.2 Search and Manage Log
Guides on searching and managing device logs for troubleshooting.
12.3 Import and Export Configuration File
Details how to import and export device configuration files for batch setup.
12.4 Export Diagnose Information
Explains how to export diagnostic information for troubleshooting purposes.
12.5 Reboot
Guides on how to reboot the device through the browser interface.
12.6 Restore and Default
Explains how to restore device parameters to default or factory settings.
12.7 Upgrade
Guides on upgrading the device firmware with the correct package.
12.8 View Open Source Software License
Explains how to view the open source software licenses used by the device.
12.9 Time and Date
Covers configuring time zone, time synchronization, and Daylight Saving Time (DST).
12.9.1 Synchronize Time Manually
Guides on manually synchronizing the device's time with a computer.
12.9.2 Set NTP Server
Explains how to use an NTP server for accurate time synchronization.
12.9.3 Set DST
Guides on setting Daylight Saving Time (DST) parameters.
12.10 Set RS-232
Details configuring the RS-232 interface for device debugging and peripheral communication.
12.11 Set RS-485
Explains configuring the RS-485 interface for long-distance data transmission.
12.12 Set Same Unit
Guides on setting uniform temperature and distance units across the device.
12.13 Security
Covers various security parameters to enhance device protection.
12.13.1 Authentication
Explains how to set up RTSP and WEB authentication for network access security.
12.13.2 Security Audit Log
Details how to search and manage security audit logs for intrusion detection.
12.13.3 Set IP Address Filter
Guides on enabling an IP address filter to allow or forbid access from specific IPs.
12.13.4 Certificate Management
Explains managing server/client certificates and setting up expiration alarms.
12.13.5 Control Timeout Settings
Guides on setting automatic logout timeouts for inactivity.
12.13.6 Set SSH
Explains how to enable SSH for secure remote login.
12.13.7 Set HTTPS
Details enabling HTTPS for encrypted transmission and secure remote access.
12.13.8 Set QoS
Covers Quality of Service (QoS) settings for managing network delay and congestion.
12.13.9 Set IEEE 802.1X
Explains setting IEEE 802.1X for user authentication and network access.
12.14 User and Account
Covers managing user accounts and their permissions on the device.
12.14.1 Set User Account and Permission
Guides on adding, modifying, and assigning permissions to user accounts.
Chapter 13 Appendix
13.1 Common Material Emissivity Reference
Provides a reference table of material emissivity values for temperature measurement.
13.2 Device Command
Offers information on common serial port commands for device control.
13.3 Device Communication Matrix
Provides a matrix detailing communication ports used by thermal cameras.
13.4 FAQ
Links to frequently asked questions for common issues and solutions.
Need help?
Do you have a question about the DS-2TD2637-25/QY and is the answer not in the manual?
Questions and answers