The External Monitor Is Blank Or The Image Is Unstable; The Cursor Does Not Correctly Follow The Pen Movements - Fujitsu FPCM11752 Operating Manual

Troubleshooting and tips

The external monitor is blank or the image is unstable

Monitor Screen
Cause
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.
The cursor does not correctly follow the
pen movements
Cause
Pen incorrectly calibrated
114
Troubleshooting
► Terminate the application program in
Windows by pressing
fault persists after closing the program, use
the key combination for switching the screen
output (see "Key combinations", Page
switch over to the notebook's LCD screen.
Change the following setting:
► Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
► Select monitor: Select monitor 1 or 2 as
described in the documentation for your
operating system.
Fault elimination
Windows XP
► Calibrate the pen as shown under Tablet
and Pen Settings in the Control Panel, see
"Setting the pen", Page 38
the pen", Page 38.
Windows Vista
► Calibrate the pen as shown under Tablet PC
Settings in the Control Panel, see
the pen", Page 38
Page 38.
Windows 7
► Calibrate the pen as shown under Hardware
and Sound / Tablet PC Settings in the Control
Panel, see "Setting the pen", Page 38
"Calibrating the pen", Page
+ . If the
Alt F4
and "Calibrating
"Setting
and "Calibrating the pen",
38.
Fujitsu Technology Solutions
45) to
and