Brief Overview Of Security Functions - Fujitsu FPCM11752 Operating Manual

Security functions

Brief overview of security functions

Detailed information about the security equipment of your device can be found
in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD
or on our website at "http://ts.fujitsu.com/support/".
Security functions
Kensington Lock
Fingerprint sensor (depending
on the device)
BIOS password protection
Boot from removable media
Owner Information
System Lock
SmartCard reader (device
dependent)
Trusted Platform Module
(device dependent)
76
Type of protection
Mechanical
Biometric
Password protection for BIOS
Setup, operating system and
hard disk with supervisor and
user password. The passwords
consist of a maximum of eight
alphanumeric characters.
Prevents unauthorised booting
of an operating system from
external media (e.g. USB stick,
USB CD-ROM drive etc.).
Overlay service desk or owner
information during the boot
process.
The BIOS and the system can
only be started with SmartCard
and PIN.
PIN and SmartCard protection
for operating system
Identification and authentication
of the notebook
Preparation
Fit and lock Kensington
MicroSaver (accessory).
Install the supplied fingerprint
software.
Specify at least one supervisor
password in the BIOS Setup
and activate the password
protection for the operating
system and hard disk as
desired.
In the BIOS Setup, go to the
Security menu and edit the
option Boot from Removable
Media.
In the BIOS Setup, go to the
Security menu and edit the
option Owner Information.
Initialise the SmartCard in the
BIOS.
Install software e.g. SmartCase
Logon+ (accessories). Specify
a password when using the
SmartCase Logon+ software.
Define a supervisor password
in the BIOS Setup and enable
the TPM (Security Chip).
Fujitsu Technology Solutions