Brocade Communications Systems 1606 Administrator's Manual page 33

2. Connect Fibre Channel cables from the switch to your host and storage devices. Ensure that
EZSwitchSetup Administrator's Guide
53-1001344-01
I O
I O
I
1
2
I O
I O
I
1
1 Brocade switch
2 Open the SFP bale
FIGURE 17
Installing SFPs
the physical connections are exactly as indicated on the Configure Ports and Connect Devices
screen.
a. Remove any plastic protectors from the Fibre Channel cable ends, and position the cable
connector so that it is oriented correctly.
b. Insert the cable connector into the SFP until it is firmly seated and the latching mechanism
clicks.
Connecting devices and completing the setup
!
3
scale: 1/2" = 1"
!
4
3 Position SFP and insert until firmly seated
4 Close the latching bale
A
B
2
21