4. Select an option for assigning the IP address and click Next. The options vary depending on the
EZSwitchSetup Administrator's Guide
53-1001344-01
FIGURE 8
Second Discover Switch screen
configuration of your switch:
•
Keep the current switch IP configuration.
This option is available only if EZSwitchSetup detected a valid IP address. Skip to
"Confirming IP addresses"
•
Manually assign a new static IP address.
If you select this option and click Next, the Set Switch IP Address screen is displayed
(Figure
9). Continue with
•
Automatically obtain a valid IPv4 address.
Select this option only if a DHCP server is available on your network. When you click Next,
an IP address is automatically obtained from the DHCP server and the Confirm IP Address
screen is displayed. Skip to
Installing and running the EZSwitchSetup wizard
on page 13.
step 5
to enter the IP address.
"Confirming IP addresses"
on page 13.
2
11