Command Syntax Conventions; Command Examples; Notes, Cautions, And Warnings - Brocade Communications Systems 1606 Administrator's Manual

For readability, command names in the narrative portions of this guide are presented in mixed
lettercase: for example, switchShow. In actual examples, command lettercase is often all
lowercase. Otherwise, this manual specifically notes those cases in which a command is case
sensitive.

Command syntax conventions

Command syntax in this manual follows these conventions:
command
option, option
--
argument, arg
-
[ ]
variable
...
value
|

Command examples

This book describes how to perform configuration tasks using the Fabric OS command line
interface, but does not describe the commands in detail. For complete descriptions of all Fabric OS
commands, including syntax, operand description, and sample output, see the Fabric OS
Command Reference.

Notes, cautions, and warnings

The following notices and statements are used in this manual. They are listed below in order of
increasing severity of potential hazards.
NOTE
A note provides a tip, guidance, or advice, emphasizes important information, or provides a
reference to related information.
ATTENTION
An Attention statement indicates potential damage to hardware or data.
FICON Administrator's Guide
53-1001771-01
italic text Provides emphasis
Identifies variables
Identifies paths and Internet addresses
Identifies document titles
text Identifies CLI output
code
Identifies command syntax examples
Commands are printed in bold.
Command options are printed in bold.
Arguments.
Optional element.
Variables are printed in italics. In the help pages, values are underlined or
enclosed in angled brackets < >.
Repeat the previous element, for example "member[;member...]"
Fixed values following arguments are printed in plain font. For example,
show WWN
--
Boolean. Elements are exclusive. Example: show mode egress | ingress
-- -
ix