Dell PowerVault 50F User Manual page 33

support.dell.com

Switch Name field
Domain ID field
Switch Disabled
checkbox
Network
Configuration
Ethernet IP field
Ethernet
Subnetmask field
Fibre Channel IP
field
Fibre Channel
Subnetmask field
Gateway IP field
Syslog Daemon
IP field
Switch Port
Configuration field
Port Disabled
checkbox
Commit Configu-
ration Changes
button
Reset button
  
Displays or sets the switch name. To change the name,
enter a new name in this field.
Displays or sets the switch domain ID. Domain IDs
must be unique within a fabric.
To change the domain ID, enter a new domain ID in this
field. Use a number from 1 to 239 for normal operating
mode (FCSW compatible) and a number from 0 to 31
for VC-encoded address format mode (backward com-
patible to PowerVault 50F switch).
Check to disable the switch; uncheck to enable.
Displays or sets the IP address for the Ethernet connec-
tion to the switch.
Displays or sets the ethernet subnetmask. The default
value is none. Contact your network administrator for
the value to enter. If you change the value, restart your
browser.
Displays or sets the Fibre Channel IP address.
Displays or sets Fibre Channel subnetmask. If you
change the value, restart your browser.
Displays or sets the gateway IP address. Contact your
network administrator for the IP address. If you change
the value, restart your browser.
Displays or sets the destination station IP address for
sending events using syslog protocol to host. Contact
your network administrator for the IP address.
If checked, the port is disabled. To enable the port,
uncheck the box.
Click to apply the changes you made.
Click to reset all components to the values present
when you launched the Switch Administration.
Using the Dell PowerVault Switch Manager 2-23