Dell PowerVault 50F User Manual page 24

2-14 Dell PowerVault Switch Manager User's Guide

Configuration
Members field
Enable Config
checkbox
Enabled Config field
Apply button
Cancel button
Done button
  %  *
The Switch Management Application is a representation of the front panel of the
switch and is displayed when you click a switch icon from the Fabric View. The infor-
mation displayed is as close as possible to a real time view of switch status.
Figure 2-7 shows the Switch Management Application. Table 2-7 provides a
description for each component in this window.
  
Displays a list of members for the selected zone config-
uration; only one configuration can be enabled at a time;
if no configurations are enabled, the zone configurations
are not active in the fabric
Check to enable the currently selected configuration;
uncheck to disable; the enabled configuration does not
actually take effect until you click Apply
Displays the enabled configuration or the configuration
that will be enabled when you change configurations
and click Apply; the enabled configuration does not
actually take effect until you click Apply
Click to apply all changes made to the switch during this
session
NOTE: If you have made changes to a function, click
Apply before switching to another function; otherwise,
you may lose the changes.
Click to cancel all changes and exit Zone Administra-
tion; changes cannot be canceled after they have been
applied
Click to apply all changes made to the switch during this
session and close the dialog box