Related Manuals for HP ProCurve J4862B
Summarization of Contents
Descriptions of HP ProCurve Switch gl Modules
HP ProCurve 10/100-TX gl Module
Details the 24-port module for 10/100 Mbps operation with Auto-MDIX.
HP ProCurve 100/1000-T gl Module
Details the 6-port module for 1000 Mbps operation with Auto MDI/MDI-X.
HP ProCurve Gigabit Transceiver gl Module
Details the module featuring 3 transceiver slots for various transceivers.
HP ProCurve mini-GBIC gl Module
Details the module with 6 mini-GBIC slots for expansion.
HP ProCurve 100-FX MTRJ gl Module
Details the 12-port module for 100 Mbps fiber-optic networking.
HP ProCurve Gig-T/mini-GBIC gl Module
Details the module with 20 ports and 2 mini-GBIC slots.
Features of HP ProCurve Switch gl Modules
Auto-Enabled and Auto-Configuration Ports
Describes ports ready for network operation and default configurations.
Module and Port Status LEDs
Explains LEDs providing link status, network activity, and bandwidth information.
Hot-Swap Module and Transceiver/mini-GBIC Operation
Details adding or replacing modules/transceivers without powering down the switch.
Auto-MDIX and Auto MDI/MDI-X Features
Explains automatic negotiation of straight-through or crossover cables for twisted-pair connections.
Standards Adherence
Lists IEEE standards compatibility for various module types and ports.
Installing the gl Modules
Installation Overview
Introduces the process of installing gl modules into HP ProCurve switches.
Installation Precautions
Details safety measures, including static electricity handling and module insertion.
Installation Procedures
Step-by-step guide for physically installing modules into switch slots.
Installing or Removing mini-GBICs
Instructions for installing and removing mini-GBICs from modules.
Verifying Module Installation
How to check if modules are correctly installed using LEDs.
Connecting Network Cables
Guidance on connecting network cables to module ports.
Customizing Port Configuration
Steps for configuring module ports after installation.
Replacing or Removing a Module
Module Removal and Replacement Procedures
Step-by-step guide for removing and replacing modules in the switch.
Resetting the Switch
Reasons and Methods for Resetting
Explains when and how to reset the switch for hardware/software changes.
Troubleshooting
LED Error Indicators
Describes LED displays indicating module or connection errors.
Diagnostic Tips for LED Errors
Provides solutions for common LED error indicators.
Customer Support Services
Accessing Technical Support
Information on obtaining technical support from HP.
Specifications
Environmental Specifications
Details operating and non-operating environmental conditions.
Laser Specifications
Information regarding Class 1 Laser Products and compliance.
Connector Types
Describes the RJ-45 and fiber-optic connectors used.
Cable Types and Requirements
Details twisted-pair and fiber-optic cable specifications and lengths.
Mode Conditioning Patch Cord for Gigabit-LX
Explains the use and installation of mode conditioning patch cords.
EMC Regulatory Statements
Country-Specific EMC Compliance
Details EMC compliance for USA, Canada, Australia/New Zealand, Japan, Korea, and Taiwan.
Need help?
Do you have a question about the ProCurve J4862B and is the answer not in the manual?
Questions and answers