Dell PowerVault 200S Rack Installation Manual page 25

support.dell.com
      " 
To install the storage system in the rack, perform the following steps.
1. Lift the storage system into position, and insert the storage system's rails into
the channels of the interior slides (see Figure 1-10).
interior slide
2. To secure the storage system to the rack, use a Phillips-head screwdriver to
tighten the four captive screws on the mounting ears of the storage system.
Ensure that the screws pass through the holes of the front vertical rail of the rack
and into the threaded holes of the mounting-bracket flange (see Figure 1-10).
3. Perform the steps for connecting your storage system to the host computer as
described in your Installation and Service Guide.
Dell PowerVault 200S and 210S Storage Systems Rack Installation Guide
mounting ear
captive screws
(2 per ear)
1-11