Dell PowerVault 200S Configuration
Installing the dell powervault 20xs stabilizers for
stand-alone configuration
Hide thumbs
Also See for PowerVault 200S:
- Installation and service manual (148 pages) ,
- Rack installation manual (26 pages) ,
- Replacement instructions manual (14 pages)
Advertisement
(Rev. 11/3/98) FILE LOCATION: S:\SYSTEMS\Hendrix\Ts\standalone\5920Pam0.fm
Perform the following steps to attach the stabilizers to the chassis, which converts a
Dell PowerVault 20 x S storage system to a free-standing, vertical configuration:
1.
Carefully turn the chassis upside down.
2.
Locate the two pairs of screw holes on the bottom panel.
3.
Align one of the stabilizers with one pair of screw holes, and then align the other
stabilizer with the other pair of screw holes, as shown in Figure 1.
stabilizers (2)
DELL CONFIDENTIAL - PRELIMINARY
www.dell.com
bottom of chassis
2/15/99
P/N 5920P
December 1998
™
Advertisement
Table of Contents
Related Manuals for Dell PowerVault 200S
Summary of Contents for Dell PowerVault 200S
- Page 1 (Rev. 11/3/98) FILE LOCATION: S:\SYSTEMS\Hendrix\Ts\standalone\5920Pam0.fm Perform the following steps to attach the stabilizers to the chassis, which converts a Dell PowerVault 20 x S storage system to a free-standing, vertical configuration: Carefully turn the chassis upside down. Locate the two pairs of screw holes on the bottom panel.
- Page 2 © 1998 Dell Computer Corporation. All rights reserved. Printed in the U.S.A. Trademarks used in this text: Dell , the DELL logo, and PowerVault are trademarks of Dell Com- puter Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Need help?
Do you have a question about the PowerVault 200S and is the answer not in the manual?
Questions and answers