Dell PowerVault 200S Manual
Dell powervault storage systems lock bar replacement
Hide thumbs
Also See for PowerVault 200S:
- Installation and service manual (148 pages) ,
- Rack installation manual (26 pages) ,
- Replacement instructions manual (14 pages)
Related Manuals for Dell PowerVault 200S
Summary of Contents for Dell PowerVault 200S
- Page 1 ™...
- Page 2 Reproduction in any manner whatsoever without the written permission of Dell Computer Corpo- ration is strictly forbidden. Trademarks used in this text: Dell , the DELL logo, and PowerVault are trademarks of Dell Computer Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
- Page 3 This document explains how to replace the lock bar in your Dell PowerVault 20 x S stor- age system. Before you perform any of the procedures in this section, read the following warning for your personal safety and to prevent damage to the storage system from electro- static discharge (ESD).
- Page 4 Perform the following steps to replace the lock bar in your Dell PowerVault 20 x S stor- age system: Turn off the system and remove all power and signal cables. If the storage system is installed in a rack, it must be removed from the rack.
- Page 5 Dell PowerVault 20xS Storage System Lock Bar Replacement...
- Page 6 Remove the internal lock bar and spring. 10. Remove the four screws on the left lock arm bracket and the four screws on the right lock arm bracket and remove them from the storage system. Dell PowerVault 20xS Storage System Lock Bar Replacement...
- Page 7 20. Place the key in the keylock and turn it to the locked position. Remove the key from the keylock. 21. Reinstall the storage system into the rack or enclosure. 22. Reconnect all power and signal cables. Dell PowerVault 20xS Storage System Lock Bar Replacement...
- Page 8 Dell PowerVault 20xS Storage System Lock Bar Replacement...
- Page 9 ™...