Intel Raid Controller Srcsasjv; Protocol Support; Operating System Support; Usability - Intel SRCSASJV - RAID Controller Hardware User's Manual

Hardware user guide
Table of Contents

Advertisement

®
Intel
RAID Controller SRCSASJV
The Intel
an integrated LSI* 1078 RAID-On-Chip chipset, providing both a SAS controller and
RAID engine. The controller ships with 512 MB RAM in a mini-DIMM slot that supports
DDR2 667 MHz ECC SDRAM. Eight independent ports are available, using any two of
the mini SAS 4i multi-lane connectors, this controller supports up to 240 enterprise-class
SAS or SATA devices and 64 logical drives. The PCI-Express* connector fits into an x8
or x16 PCI-Express slot capable of 2.5 Gbps per lane over PCI Express* x8 with a 3 Gbps
point to point transfer rate.
The SAS controller supports the ANSI Serial Attached SCSI (SAS) standard, version 1.0
and the Serial ATA (SATA) protocol defined by the Serial ATA specification, version 1.0a.

Protocol Support

Serial SCSI Protocol (SSP): Communication with other SAS devices.
SATA II Protocol: Communication with other SATA II devices.
Serial Management Protocol (SMP): Topology management information sharing
with expanders.
Serial Tunneling Protocol (STP) support for SATA II through expander interfaces.

Operating System Support

Windows Server 2003*, Windows 2000* Enterprise Server, SP4 and Windows XP*.
Red Hat* Enterprise Linux 3.0, 4.0, and 5.0.
SuSE* Linux Enterprise Server 9, SP1-3 and SLES 10.
The operating systems supported may not be supported by your server board. See the
tested operating system list for your server board at
http://support.intel.com/support/motherboards/server/. See also the tested hardware and
operating system list for the RAID Controller SRCSASJV to make sure the RAID card
supports your operating system.

Usability

The card ships with both a standard and a low-profile bracket.
Small, thin cabling with serial point-to-point 3 Gbps data transfer rates.
Support for non-disk devices and mixed capacity drives.
Support for intelligent XOR RAID levels 0, 1, 5, 6, 10, 50, and 60.
Dedicated or global hot spare with auto rebuild if an array drive fails.
User defined stripe size per drive: 8, 16, 32, 64 (def), 128, 256, 512, or 1024 KB.
Intel® RAID Controller SRCSASJV Hardware User's Guide
®
RAID Controller SRCSASJV is an intelligent low-profile RAID adapter with
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SRCSASJV - RAID Controller and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Srcsasjv

Table of Contents