Using Line-In - Sonos BUNDLE 250 - V 090601 Product Manual

Sonos Bundle 250

Using Line-In

You can connect an external source such as a CD player, portable music player, or
television to your Sonos Multi-Room Music System. The device will be automatically
detected as soon as you plug it in.
• Use a standard RCA cable to plug an external source like a CD player into the
analog Audio In connections on the back of your ZonePlayer.
• If you are connecting a portable player to the ZonePlayer, you will need a 1/8
inch mini-stereo to RCA audio cable instead. Plug the mini-stereo end into the
portable device and the RCA end into the Audio In connection on the
ZonePlayer.
Using a Sonos Controller:
• To play music from this line-in source, select Line-In from the Music menu,
select the source, and select Play Now.
• To change the name of this device, select Settings→ZonePlayer Settings.
Select the ZonePlayer this source is connected to, and then touch Line-In
Source Name. Select a new name from the list, or type a unique name.
• To change the line-in level, select Settings→ZonePlayer Settings. Select the
ZonePlayer this source is connected to, and then touch Line-In Source Level.
Select a new level.
Using the Desktop Controller software:
• To play music from this line-in source, select the Line-In tab from the Music
Library, select the source, and click Play Now.
• To change the settings for this device, select the Line-In tab from the Music
Library, select the source, and click Setup. Select the Line-In tab to make
changes.
A default (typical) line-in level is automatically assigned when you select a source
name, but if the volume sounds too low, you can select a higher line level for this
device. (You may experience sound distortion at higher volume levels if you set the
level too high.)
15