MACROMEDIA STUDIO 8-EXPLORING STUDIO 8 Manual page 79

To display or hide the drawing guides:
Select View > Guides > Show Guides.
If the grid is visible and Snap to Grid is turned on when you create guides,
guides will snap to the grid.
To turn snapping to guides on or off:
Select View > Snapping > Snap to Guides.
Snapping to guides takes precedence over snapping to the grid in places
where guides fall between grid lines.
To move a guide:
1. Make sure rulers are visible by selecting View > Rulers.
2. With the Selection tool, click anywhere on the ruler and drag the guide
to the desired place on the Stage.
To remove a guide:
With guides unlocked, use the Selection tool to drag the guide to the
horizontal or vertical ruler. For information on locking and unlocking
guides, see the following procedure.
To lock guides:
Select View > Guides > Lock Guides.
You can also use the Lock Guides option in the Edit Guides (View >
Guides > Edit Guides) dialog box. For more information, see the following
procedure.
Flash basics 79