MACROMEDIA STUDIO 8-EXPLORING STUDIO 8 Manual page 223

4. In the Library panel (Window > Library), drag the imageHolder symbol
to the drawing area.
You have now created an instance of the imageHolder symbol. This
instance is part of the new slides symbol you are creating.
5. With the new instance still selected on the Stage, in the Property
inspector, enter holder0 in the Instance Name text box.
This gives the instance its own name that is separate from the
symbol name.
6. Also in the Property inspector, enter 0 in both the X and Y text boxes
and press Enter (Windows) or Return (Macintosh).
This locates the upper-left corner of the holder0 instance at the upper-
left corner of the slides symbol.
7. Drag the imageHolder symbol from the Library panel to the drawing
area and place it just below the holder0 instance.
8.
In the Property inspector, enter holder1 in the Instance Name text box.
9.
Enter 0 in the X text box and 150 in the Y text box and press Enter
or Return.
10. Repeat the process for a third, fourth, and fifth instance of the
imageHolder symbol.
In the Property inspector, give the new instances the following
properties:
Third instance:
Instance Name = holder2
X = 0
Y = 300
Fourth instance:
Instance Name = holder3
X = 0
Y = 450
Fifth instance:
Instance Name = holder4
X = 0
Y = 600
Create symbols 223