Flex 2 syntax
In Flex 2, you refer to named WebServices with the
tag. In the configuration file, you define the location of the WSDL file
<mx:WebService>
and the endpoint as part of the service destination.
MXML tag:
<mx:WebService id="employeeWS" destination="SalaryWS">
<mx:operation name="getList"/>
</mx:WebService>
services-config.xml file:
<proxy-service>
<destination id="SalaryWS">
<properties>
<wsdl>{context.root}/services/SalaryWS?wsdl</wsdl>
<soap>{context.root}/services/SalaryWS</soap>
</properties>
<adapter ref="soap-proxy"/>
</destination>
</proxy-service>
Migrating secure data services
This section describes the changes you must make to your destination definitions in order to
use secured data services in your Flex applications.
Migrating services that use run-as
Third-party service endpoints may require authentication information. In Flex 1.5, you used
the
element to pass credentials to remote endpoints. In Flex 2, you use r
run-as
and
username
remote-password
requires.
The changes in this section apply to the HTTPService, WebService, and RemoteObject
services.
destination
elements to specify credentials that a remote endpoint
attribute of the
emote-
Migrating secure data services
145