Connecting To The Sample Database (Jsp) - MACROMEDIA DREAMWEAVER 8-GETTING STARTED WITH DREAMWEAVER Getting Started

To upload the samples files to the web server:
1.
In the Files panel (Window > Files), select the root folder of the site in
the Local View pane.
The root folder is the topmost folder in the list.
2. Click the blue Put Files arrow icon in the Files panel toolbar, and
confirm that you want to upload the entire site.
Dreamweaver copies all the files to the web server folder you defined in
"Defining a remote folder" on page
The Dreamweaver site is now defined. The next step is to connect to the
sample database installed with Dreamweaver.
Connecting to the sample
database (JSP)
During installation, Dreamweaver copies a sample Microsoft Access
database to your hard disk. This section describes how to create a
connection to the sample database.
For information on connecting to another database, see
"Database Connections for JSP Developers"
To create a database connection:
1. Install the bridge driver (see
2. If you're using a remote computer as a server, set up the sample database
on the remote computer (see
computer)" on page
3. Create the connection in Dreamweaver (see
connection" on page
292.
"Installing the bridge driver" on page
"Setting up the database (server on remote
297).
298).
Chapter 27,
in Using Dreamweaver.
"Creating a database

Connecting to the sample database (JSP) 295

296).