MACROMEDIA DREAMWEAVER 8-GETTING STARTED WITH DREAMWEAVER Getting Started page 149

3. Switch to Code view by clicking Code view in the Document toolbar,
or by selecting View > Code View.
In Code view, the insertion point should be between an open and a
close paragraph tag, as follows:
If you don't see an open and a close paragraph tag before the closing
table cell </td> tag, type them in as follows:
Place the insertion point between the opening
tag.
<p>
4.
Delete anything that might be between the opening
closing tag, for example, a nonbreaking space (&nbsp;).
<p>
tag and the closing
<p>
tag and the
<p>
Add an image with code hints 149