Stopping And Starting Breeze Edge Server - MACROMEDIA BREEZE 5 - INSTALLING AND CONFIGURING EDGE SERVER Manual

FCS File XML Tag
Server.xml
SSLVerifyCertificate
Server.xml
SSLVerifyDepth
Stopping and starting Breeze Edge
Server
You can verify that the installation was successful by stopping and starting Breeze Edge Server
and the FCS services that support it.
To start Breeze Edge Server:
Select Start > Programs > Macromedia Breeze Edge Server > Start Breeze Edge Server.
To verify that Edge Server is operating:
Go to the Control Panel.
Select the Services Panel.
Locate the following services: Flash Communication Administration Server and Flash
Communication Server.
Their status should read "started."
24 Macromedia Breeze Edge Server
Default Description
true Configures the server to act as
an SSL client (out-going SSL
connections). The tag specifies
whether or not to verify the
certificate that is returned by the
server being connected to.
Certificate verification is enabled
by default. To disable certificate
verification, specify false.
Warning: Disabling the
certificate verification can result
in a security risk.
9 Configures the server to act as
an SSL client (out-going SSL
connections).
The tag specifies the maximum
depth in the certificate chain we
are willing to accept. If a self-
signed root certificate cannot be
found within this depth, the
certificate verification will fail.