MACROMEDIA BREEZE 5 - INSTALLING AND CONFIGURING EDGE SERVER Manual page 18

Defining the SSL tags in FCS
The following table lists alphabetically all the SSL-specific tags in both the Adaptor.xml and
Server.xml files. You must configure these tags to enable SSL in FCS.
FCS File XML Tag
Adaptor.xml
Redirect
Adaptor.xml
SSLCertificateFile
Adaptor.xml
SSLCertificateKeyFile type =
PEM
18 Macromedia Breeze Edge Server
Default Description
[none] Specifies whether unknown
requests are redirected to an
external server such as Breeze.
When FCS receives an
unknown request, the request is
redirected to the specified
redirect host. For redirection to
work, HTTP tunneling must be
enabled.
You can control which port on
the redirect host listens for
redirected traffic.
A request for redirection to a
specific host can be:
Redirect enable=false>
<Host port="80">:8080</Host>
<Host port="443">:8443</Host>
</Redirect>
[none] Specifies the location of the
certificate file to send to the
client. If an absolute path is not
specified, the certificate is
assumed to be located relative
to the Adaptor directory.
PEM Specifies the location of the
private key file for the certificate.
If an absolute path is not
specified, the key file is assumed
to be located relative to the
Adaptor directory. If the key file
is encrypted, the pass phrase
must be specified in the
SSLPassPhrase
The attribute specifies the
type
type of encoding used for the
certificate key file. This can be
either
PEM
tag.
or .
ASN1