Advertisement
Quick Links
QUATRO
Air Technologies Inc.
SPH & AF400 Vac Series
Premium Turbine Dust Collectors
Instruction & Maintenance Manual
READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THE SYSTEM
STORE THE MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE
THIS MANUAL CONTAINS CRITICAL OPERATING INFORMATION
WHICH IF NOT FOLLOWED
COULD CAUSE DAMAGE TO THE SYSTEM NOT COVERED BY WARRANTY.
1
Advertisement
Related Manuals for Quatro AF400 Vac Series
Summarization of Contents
Introduction and System Overview
SPH AF System Filtration Stages
Describes the 3 or 4 filtration stages in the SPH/AF system.
Control Panel and Operation
iSeries Control Panel Overview
Details the iSeries control panel, soft touch buttons, LEDs, and alarms.
LED Diagnostic Table
Explains LED status, audible alerts, and conditions for troubleshooting.
Alarm Mute Feature Explanation
Explains the alarm mute feature and its behavior, including LED status.
Manual and Automatic Operation Modes
Normal Manual Operation
Describes manual operation using the power button.
Variable Speed Control and Autoflow
Explains variable speed control and the AUTOFLOW system pressure compensation.
Temporary ON Mode Function
Describes how to use the temporary ON mode for quick cleaning.
Remote Operation and Status Signals
Remote Connection and Enabling
Explains how to connect the system for remote operation using cables.
Remote Status Output Signals
Details system status signals like Run and Fault, and their contact configurations.
Filter Service and Replacement
Filter Access and Installation Sequence
Explains how to access filters and the correct installation order for standard filters.
Odour Filter Maintenance
Explains that the odor filter can be refilled with new media instead of replaced.
Resetting Service Filter Alert
Provides step-by-step instructions to reset the 'Service Filter(s)' alert.
Motor Service and Replacement
Motor Access and Types
Details accessing motors and identifying motor types (Quick Change, Infinity, Brushless).
Quick Change Brush Motor Replacement
Provides step-by-step instructions for replacing motor brushes.
Resetting Service Motor Alert
Instructions to reset the 'Service Motor(s)' alert after brush replacement.
Troubleshooting Guide
Common Symptoms and Solutions
Lists common operational symptoms and their possible causes and suggested solutions.
Specifications and Parts
System Specifications
Lists technical specifications including airflow, dimensions, voltage, and power.
General Replacement Parts
Lists common replacement parts with their part numbers and quantities.
Warranty Information
Warranty Coverage and Limitations
Outlines the warranty period, coverage, and specific exclusions.
Pre-Filter Section PF400S
What is the PF400S Pre-Filter Section
Describes the PF400S pre-filter section as a passive filter enhancer.
PF400S Internal Components
Details the internal filter bags and their capture capabilities.
PF400S Installation
Provides guidance on installing the PF400S onto SPH400/800 systems.
Filter Change and Usage
Ease of Filter Change
Explains the simple process for changing filter bags in the unit.
PF400S Usage and Configurations
Describes how the PF400S can be used standalone or mounted, with collar options.
Need help?
Do you have a question about the AF400 Vac Series and is the answer not in the manual?
Questions and answers