Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Ecoray ULTRA 1040HF
Summarization of Contents
Section 1. General Information
Complied Standard
Lists standards the unit complies with for safety and EMC.
Contact
Provides manufacturer and representative contact details.
Guarantee Conditions
Details the warranty terms and conditions for the equipment.
Safety Information
Lists crucial precautions for safe operation and handling of the unit.
Radiation Information
Provides guidelines and warnings related to radiation safety during use.
Warning Information
Highlights important warnings and cautions for the user.
Warning Label Information
Explains the various warning labels found on the unit.
Label Information
Details product labels, identification, and their meanings.
Intended Use
Specifies the designated application of the x-ray unit.
Note to User
Emphasizes understanding manual instructions for safe operation and performance.
Symbols and Terms
Defines symbols used in the manual and their meanings.
Product Name Designation
Identifies the main and additional product names.
Electromagnetic Compatibility Statement
Addresses potential interference with other electronic devices.
Cleaning
Provides instructions for cleaning the diagnostic x-ray unit.
Proper Environment
Outlines the recommended environmental conditions for operation and storage.
Accessories Composition
Lists and describes the included accessories with the unit.
Dimension
Shows the physical dimensions and weight of the unit.
Name of Each Part
Identifies and labels the different components of the x-ray unit.
Identification Label
Explains the information presented on the unit's identification label.
Section 2. Operation
Operation Conditions
Specifies the power source and operational parameters for the unit.
Operation Instruction
Guides the user through the steps for performing X-ray procedures.
Normal Operation Check
Details procedures to verify the unit's functionality before use.
APR Mode
Explains the Anatomical Programming Radiography (APR) settings.
Execution of Radiographs
Describes the step-by-step process for taking X-ray images.
Error code and Corrective Actions
Lists common error codes and their corresponding solutions.
Exposure Data Table
Provides recommended exposure settings for different animal sizes and conditions.
Designated significant zones of occupancy
Defines safe zones around the unit during operation.
Section 3. Service Manual
Calibration procedures
Outlines the steps for calibrating the diagnostic x-ray unit.
Reproducibility of the Radiation Output
Details how to test and verify the consistency of radiation output.
Lamp Exchange Procedure
Provides instructions for replacing the unit's lamp.
Fuse Exchange Procedure
Details the steps for replacing the unit's fuse.
Put in the Hand Switch
Instructions for connecting the hand switch to the unit.
Put in the Power Connector and Plug
Steps for connecting the power cable to the unit.
Diagnostic X-ray Unit Stand Fixing
Instructions for mounting the unit onto a stand.
Section 4. Schematics
Block Diagram
Presents a high-level overview of the unit's functional blocks.
Power Board
Detailed schematic of the power supply circuitry.
Power Board - DRV
Schematic for the drive control circuitry on the power board.
Main Board - CPU
Schematic of the main control board featuring the CPU.
Main Board - EP FB
Schematic of the EP Feedback (EP FB) section on the main board.
Main Board - IP FB
Schematic of the IP Feedback (IP FB) section on the main board.
Need help?
Do you have a question about the ULTRA 1040HF and is the answer not in the manual?
Questions and answers