Related Manuals for ECOPERLA SOFTOWER M
Summarization of Contents
Ecoperla Softower User Manual Introduction
Safety Precautions for Device Operation
Provides essential precautions for safe installation, operation, and maintenance of the water softening device.
Understanding Water Hardness and Softening
Explains water hardness, its types, and its impact on daily life, appliances, and health.
How the Ecoperla Softower Works
Description of Ion Exchange Operation
Details the ion exchange process used to remove calcium and magnesium ions from water.
Essential Operation and Maintenance
Guidelines for Daily Operation and Upkeep
Outlines regular salt replenishment and pre-filter replacement for optimal device performance.
Installation and Start-up Procedures
4.1. Requirements for Device Installation
Outlines necessary working conditions and prerequisites for proper and trouble-free device installation.
4.2. Installation Diagram and Connection Guide
Illustrates the correct connection sequence of devices within the water softening system.
4.3. Control Valve Features and Connections
Describes the control valve, its display, and connection details for inlet, outlet, and sewage.
4.4. Step-by-Step Installation and Startup
Provides a step-by-step guide for the initial installation and startup procedures of the water softener.
Programming the Water Softener
Viewing Information on the Operation Mode Panel
Explains how to preview operational data like time, remaining water, and salt level on the valve panel.
Initial Programming Settings
Setting the Device's Current Time
Guides the user on how to set the current time on the device's control panel.
Advanced Programming Options
Selecting Display Language
Details the process for selecting the preferred language displayed on the control panel.
Entering Core System Configuration Settings
Explains how to enter foundational settings after language selection.
Setting Initial Water Hardness Level
Instructs on setting the initial water hardness level in ppm for accurate system calibration.
Regeneration Parameter Configuration
Configuring Residual Water Hardness
Explains how to set the desired residual hardness of the treated water.
Defining Regeneration Frequency by Days
Guides on setting the frequency of regeneration cycles based on the number of days.
Regeneration Timing and Mode Settings
Setting Specific Regeneration Start Time
Details how to program the specific time of day when regeneration cycles should commence.
Regeneration Process Configuration
Selecting Filtration Mode
Explains how to select the filtration type, specifically choosing "Softener" for the device.
Configuring Brining Cycle Duration
Guides on setting the duration for the brining process in minutes.
Regeneration Cycle Time Adjustments
Setting Backwash Cycle Time
Details how to set the duration for the backwash cycle in minutes.
Setting Rinsing Cycle Time
Guides on setting the duration for the rinsing cycle in minutes.
Adjusting Salt Dosage for Regeneration
Explains how to set the amount of salt (in kg) used during regeneration.
Capacity and Regeneration Strategy
Setting Ion Exchange Capacity
Guides on setting the ion exchange capacity in kilograms.
Choosing Regeneration Trigger Frequency
Explains how to choose between automatic or manual regeneration frequency.
Selecting Type of Regeneration Process
Details the three available types of regeneration: Delayed, Mixed, and Instant.
Output Signal Configuration
Configuring Output Signal 1
Explains how to configure the first output signal for external device integration.
Configuring Output Signal 2
Explains how to configure the second output signal for external device integration.
Alarm and Maintenance Settings
Setting Up Service Reminders
Guides on setting up service reminders and maintenance schedules.
Configuring Salt Level Monitoring Alarm
Details how to set the salt level alarm threshold.
Reviewing Basic Work History Data
Basic History: Days Since Last Regeneration
Shows the number of days elapsed since the last regeneration cycle.
Basic History: Water Volume Since Last Regeneration
Displays the total volume of water treated since the last regeneration.
Basic History: Total Regeneration Events History
Shows the total volume of water treated since the device was commissioned.
Reviewing Extended Work History Data
Basic History: Daily Water Usage Data
Displays the daily water consumption, allowing viewing of previous days' usage.
Basic History: Peak Water Flow Measurement
Shows the maximum water flow rate recorded.
Extended History: Software Version Details
Displays the current software version of the control valve.
Reviewing Cumulative Device Performance
Extended History: Total Device Operating Days
Shows the total number of days since the device was first put into operation.
Extended History: Total Regeneration Cycles Count
Displays the total count of regeneration cycles performed since commissioning.
Extended History: Total Water Processed Volume
Shows the total volume of water processed by the softener since its installation.
System Operation and User Responsibilities
Core Softener Operation Procedures
Explains the basic operational requirement of adding salt tablets and the need for periodic regeneration.
General Operational Best Practices
Emphasizes the importance of regular maintenance for long-term, trouble-free operation.
Critical Factors for Optimal Performance
Details essential factors like correct installation, water quality, and working conditions for optimal performance.
Essential User Maintenance Tasks
Lists routine tasks for the user, such as pre-filter replacement and salt replenishment.
Maintenance Procedures and Consumables
Medium Disinfection and Cleaning Recommendations
Recommends using specific agents for periodic disinfection and cleaning of the ion exchange medium.
Procedures for Extended System Downtime
Advises on proper procedure if the softener is unused for an extended period.
List of Required Consumable Parts
Lists the various consumable parts required for the water softener's operation and maintenance.
Understanding Warranty Voiding Conditions
Outlines factors and negligence that can lead to the invalidation of the device's warranty.
Professional Service and Support
Annual Service Technician Checklist
Details the basic and additional maintenance tasks performed by a certified service technician annually.
Policy on Improper Service Call Requests
Explains what constitutes an illegitimate service call and the associated user charges.
Need help?
Do you have a question about the SOFTOWER M and is the answer not in the manual?
Questions and answers