Table of Contents
Advertisement
Quick Links
AccuLink™ Platinum 850
Communicating Connected Control
ACONT850 Installation Guide
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
IMPORTANT — This Document is customer property and is to remain with this unit.
These instructions do not cover all variations in systems or provide for every possible contingency to be met in connection with
the installation. Should further information be desired or should particular problems arise which are not covered sufficiently
for the purchaser's purposes, the matter should be referred to your installing dealer or local distributor.
WORKS WITH
11-HD14D1-9-EN
Advertisement
Table of Contents
Related Manuals for American Standard ACONT850
Summarization of Contents
Safety Information
General Safety Precautions
Essential safety precautions and warnings for installation and operation.
Product Overview and Specifications
Product Specifications
Technical details and operating parameters of the 850 Control.
General Information and Contents
Overview of the 850 Control, package contents, and available accessories.
Installation Procedures
Location, Mounting, and Network Setup
Guidelines for selecting location, mounting the unit, and network connectivity.
Wiring and Field Diagrams
Instructions for wiring the control and understanding field wiring diagrams.
System Setup and Configuration
Initial Power-Up and Setup Wizards
Steps for initial power-up, calibration, and using setup wizards.
Smart Optimization and Installer Setup
Configuring Smart Optimization and accessing installer setup screens.
Installer Setup Groups
Detailed configuration settings for equipment, sensors, accessories, comfort, and airflow.
Service Reminders, Dealer Code, and Software Updates
Settings for maintenance reminders, dealer information, and software updates.
Basic Operation Principles
PI Control and Load Value Concepts
Understanding PI control, load values for heating and cooling.
Stage Control and Duty Cycles
How stage thresholds, inhibits, and duty cycles manage system operation.
System Modes, Fan Control, and Quiet Mode
Selecting system modes, fan control, and utilizing quiet operation features.
Air Cleaner and Other Basic Settings
Configuring air cleaner modes and other basic operational settings.
Advanced Operation and Features
Control Response Rate and Dehumidification
Adjusting response rate and managing dehumidification methods.
Dehumidifier, Dual Fuel, and Lockout Settings
Controlling dehumidifiers, dual fuel systems, and temperature lockouts.
Humidifier, Recovery, Ventilation, and Warm Air Discharge
Managing humidifiers, recovery, ventilation, and warm air discharge.
Wet Heat (Hydronic) Operation
Specific settings for hydronic heating operations.
Diagnostic Tools and Reporting
System Test Modes
Utilizing various test modes for component diagnostics.
Logs, Alerts, and History
Saving logs, understanding alerts, and viewing system history.
System Reports and Defaults
Accessing system reports and restoring factory default settings.
Troubleshooting and Notices
Troubleshooting Common Issues
Guide to diagnosing and resolving common system and control problems.
Regulatory Compliance
FCC and IC compliance information for device operation.
Need help?
Do you have a question about the ACONT850 and is the answer not in the manual?
Questions and answers