Bernina Artista 730E Instruction Manual page 264

BERNINA Computer System
Connect peripherals (special accessories) to turn your artista 730 embroidery computer into an
embroidery computer system, and take your hobby to unlimited heights of creativity.
In addition to a direct connection with the myartista Portal (information source), which takes you to the
Portal site especially created for the embroidery computer, it is also possible, for instance, to get extra
motifs from a OESD USB Stick.
Ask your BERNINA dealer for more information.
Peripherals
The following external devices can be connected
to the artista 730 embroidery computer:
BERNINA Modem
•
BERNINA-Ethernet Card
•
External Devices
260
Peripherals and Accessories – External Devices
Note:
All peripherals are special accessories,
depending on country. Ask your BERNINA
dealer for information!
Modem / Ethernet Card
(for access to myartista Portal)
It is possible to directly connect to the myartista portal (= infor-
mation platform) and access the sites that have been especially
programmed for the embroidery computer via screen on your
artista 730. Simply connect the BERNINA modem or Ethernet
Card. The myartista portal provides embroidery designs – grou-
ped by hoop size – to be downloaded to the embroidery compu-
ter.
Connecting via Modem
connect Modem
touch «Portal»
confirm message about connecting with «Yes»
when the connection to the Provider is made, then confirm
the message that appears with «OK»
select the desired hoop from the now opened screen
the embroidery motif overview for the corresponding hoop
size appears
Connecting via Ethernet Card
Connecting the Ethernet Card
press "Portal"
the embroidery computer tries to find an active Internet con-
•
nection
connection established, the hoop overview screen appears
•
select the required hoop
a collection with motifs to fit into the selected hoop appears
The content of the myartista Portal is continuously updated.