Table of Contents
Advertisement
Quick Links
PN65 / PN70 / PN80
Pneumatic Coil Nailer
OPERATIONS and MAINTENANCE MANUAL
CE DECLARATION OF CONFORMITY
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD READ AND STUDY
THIS MANUAL TO UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND
INSTRUCTIONS. KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE
REFERENCE.
Everwin Pneumatic Corp.
19'/3/19
Advertisement
Table of Contents
Related Manuals for Everwin PN80
Summarization of Contents
1-YEAR LIMITED WARRANTY
WARRANTY EXCLUSIONS
Details specific parts and conditions that are not covered under the limited warranty.
GROUNDS FOR INDUSTRIAL / PRODUCTION TOOL COVERAGE
Specifies terms and limitations for warranty coverage on industrial or production tools.
SAFETY INSTRUCTIONS
OPERATIONAL SAFETY GUIDELINES
Covers eye protection, air supply, nail loading, and general operation safety rules.
TOOL MAINTENANCE SAFETY
Advises extra care and awareness of warnings when performing tool maintenance.
TOOL SPECIFICATIONS AND TECHNICAL DATA
FASTENER AND FITTING SPECIFICATIONS
Details fastener types, sizes, air fitting requirements, and operating pressure.
AIR CONSUMPTION AND NOISE LEVELS
Presents technical data on air consumption rates and sound levels for the tool models.
VIBRATION CHARACTERISTICS
CONTACT TRIP OPERATION EXPLANATION
Explains the contact trip mechanism and its two methods of operation for driving fasteners.
SEQUENTIAL TRIP OPERATION EXPLANATION
Details the sequential trip mechanism and its operation for accurate fastener placement.
REMOTE FIRE OPERATION
Describes the operation for remote fire models, activated by a remote valve.
DIRECTIONAL EXHAUST DEFLECTOR ADJUSTMENT
Instructions for adjusting the exhaust deflector on PN80 series tools for directing air exhaust.
AIR SUPPLY, CONNECTIONS, AND LUBRICATION
AIR SUPPLY REQUIREMENTS AND SAFETY
Covers air source, fittings, hoses, regulators, filters, and pressure limits.
LUBRICATION AND COLD WEATHER USE
Provides guidelines for tool lubrication and considerations for cold weather operation.
NAIL LOADING PROCEDURES AND SAFETY
LOADING SAFETY PRECAUTIONS
Covers eye protection, accidental injury prevention, and safe handling during loading.
MAGAZINE LOADING STEPS
Details opening the magazine, adjusting nail support, placing nails, and closing the cover.
TOOL OPERATION GUIDE
PRE-OPERATION SAFETY CHECKS
Essential preliminary steps before operating the tool, including reading manual and warnings.
CONTACT TRIP OPERATION DETAILS
Explains the contact trip mechanism and its two methods of operation: single and rapid.
SEQUENTIAL TRIP OPERATION DETAILS
Details the sequential trip mechanism and its operation for accurate fastener placement.
REMOTE FIRE OPERATION DETAILS
Describes the operation for remote fire models, activated by a remote valve.
TOOL OPERATION CHECKLIST
CONTACT TRIP OPERATION CHECK
Steps to check the safety and functionality of the contact trip mechanism.
SEQUENTIAL TRIP OPERATION CHECK
Steps to verify the correct operation of the sequential trip mechanism.
ADDITIONAL SAFE OPERATION GUIDELINES
Essential safety guidelines for proper and safe tool usage beyond initial warnings.
TOOL MAINTENANCE AND TROUBLESHOOTING
MAINTENANCE AND REPAIR GUIDELINES
Covers replacement parts, assembly, air impact, driver maintenance, and authorized repairs.
Need help?
Do you have a question about the PN80 and is the answer not in the manual?
Questions and answers