Related Documents
Related Documents
For information about Cisco IOS configuration for voice applications, consult the following Cisco
IOS Release 12.0 documents:
•
Voice, Video, and Home Applications Configuration Guide
•
Voice, Video, and Home Applications Command Reference
For information about Cisco IOS configuration for ATM, consult the following Cisco IOS Release
12.0 documents:
•
Wide-Area Networking Configuration Guide
•
Wide-Area Networking Command Reference
For information about IOS configuration that is unique to the Cisco MC3810, consult the following
Cisco documents:
•
Cisco MC3810 Multiservice Access Concentrator Software Configuration Guide
•
Cisco MC3810 Multiservice Access Concentrator Software Command Reference
Supported Platforms
This feature is supported on the Cisco MC3810 multiservice access concentrator.
Supported Standards, MIBs, and RFCs
No MIBs are supported by this feature.
Other Standards
•
ATM Forum document af-uni-0010.002, ATM User-Network Interface Specification V3.1
(1994), including support for the following types of information elements:
— Traffic Descriptor
— Broadband Bearer Capability
— ATM Addressing Information
•
ATM Forum document af-sig-0061.000, ATM UNI Signaling Specification V4.0 (1996) with the
exceptions noted in "Restrictions" on page 3
•
ITU recommendation Q.2931
•
ITU-T X.213 and OSI Network Service Access Point (NSAP) addressing
•
ATM Forum document af-ilmi-0065.000, Integrated Local Management Interface (1996)
Prerequisites
•
Cisco IOS Software Release 12.0(5)XK or 12.0(7)T or a later release
•
A configured ATM network
4
Cisco IOS Release 12.0(7)T